If you own a how to reset oil meter on honda civic, the chances are an oil maintenance light will have lit up his gauge. It may be a simple reminder to change the oil or reset the oil meter after you have done an oil change. Reseting the oil meter is a very simple job, one that can surely be accomplished in just a few minutes’ time. This guide will take you through the steps necessary to reset the oil meter, whether you own an older model or a new model. So let’s dive in!
Why Reset the Oil Meter?
The oil meter in your Honda Civic is designed to track the state of your engine oil and remind you when it is time for an oil change. It’s important to reset the system after an oil change so that it can start tracking the next cycle. If you do not reset it, the oil maintenance light will remain on, and you may lose some important reminders in future scenarios.
Tools You’ll Need
Resetting the oil meter doesn’t require any special tools. All you need is:
Your Honda Civic
The ignition key or push-button start (depending on your model)
Steps to Reset the Oil Meter on a Honda Civic
Depending on the year and model of your Honda Civic, resetting the oil meter has some small changes. Below, we will show you how it’s done on the older models that have a key ignition and the newer models with a push-button start.
For Older Honda Civic Models (Key Ignition)
Your oil meter reset button should be on the highway board, which might be a small switch labeled “Reset” or otherwise “Select/Reset.”
Then this reset button must be held for about 10 seconds, during which you’ll notice the blinking of the oil maintenance light.
At the point when the blinking ends and the light goes off, you can release the button. This means the oil meter has been reset.
After switching OFF the ignition, take the key out. Restart the engine and check if the oil maintenance light stays OFF. If the oil maintenance light remains OFF, that means you have successfully reset the oil meter.
For Newer Honda Civic Models (Push-Button Start)
Should you wish to reset the oil maintenance light on your car, follow these steps: with the ignition in the off position, press the “Engine Start/Stop” button to the position of “ON” twice, but keep your foot off the brake pedal.
This will place the ignition in the “ON” position without actually starting the vehicle.
Use the steering wheel controls to navigate to the “Maintenance” or “Settings” menu on your dashboard display.
Scroll through the menu until the “Oil Life” or “Oil Meter” option appears.
Press and hold the “Enter” or “Reset” button (usually located on the steering wheel) for about 10 seconds.
The oil life percentage should reset back to 100%. Again, press the “Engine Start/Stop” button to turn off the ignition.
Start your engine to see if the oil maintenance light is off. If the light is off, the reset was successful.
For Models with a Touchscreen Display
Some newer Honda Civic models have a touchscreen infotainment system. This is how the oil meter is reset in these models:
Turn Ignition to the “ON” Position
Press the “Engine Start/Stop” button twice without touching the brake. Access the Settings Menu Go to the “Settings” menu via the touchscreen.
Select the Vehicle
Settings Go to “Vehicle Settings” and then select “Maintenance Info.” Reset the Oil Life Tap on “Oil Life” and select “Reset.” Confirm that selection when asked.
Turn Off Ignition
Press the “Engine Start/Stop” button to turn the ignition off. Start the Engine to Confirm This, start the engine to check if the oil maintenance light has turned off.
Troubleshooting Tips
If the oil maintenance light remains illuminated after doing all that, here are some things you need to check:
Make sure you follow those steps with double-checking. Holding the reset button a few extra seconds at times can help.
Ensure that the oil level is correct in your engine:
Low oil levels can keep the maintenance light on.
Check the oil filter:
A faulty and improperly attached oil filter can also keep the light on.
Consult the owner’s manual for more information:
If everything has been done and still the problem persists, the owner’s manual for the Honda Civic can help you with model-specific information regarding instructions.
Or if the light still won’t go off, visit a mechanic:
If the light still stays illuminated, this could pertain to the oil sensor or some sort of issue in the car’s computer system. You may have to consult a professional mechanic.
Why Regular Oil Changes Are Important
Resetting the oil meter is only a part of maintaining your Honda Civic. Regular oil changes are very important to keep your engine running. Here are just a few reasons why:
Lubrication:
Oil lubricates the moving parts in the engine, the wear and tear caused by friction being greatly reduced.
Cooling:
Oil helps to carry the heat away so that the engine does not become too hot.
Cleaning:
Oil takes away dirt and debris so as to keep the engine clean. Performance: New oil allows for optimal performance of the engine and fuel efficiency.
Final Thoughts
The oil meter in your Honda Civic can be reset in just a few minutes. Whether it has an old model key ignition or a new model push-button start, either way, it is easy. You can reset the oil-maintenance meter by following the instructions in this guide so that next time the oil-change cycle can be monitored properly by your vehicle’s system. Remember to keep changing oils regularly and perform scheduled service to keep your Honda Civic working nicely for years to come. However, if you are not sure of anything, then feel free to consult an owner’s manual or a mechanic.
